This is a sewing pattern for a Georgian men´s waistcoat of the late 18th century.

During the late 17th century when the doublet transformed into the coat, the waistcoat developed as an independent garment. Originally the waistcoat often had long sleeves to be seen below the shorter coat sleeves. During the 18th century the waistcoat lost it´s sleeves and became shorter. At the end of the century the waistcoat had a straight front ending at or just below the waist and had a high collar, following the high stand-up collars of the coat.

This sewing pattern shows a single-breasted waistcoat from circa 1790 with it´s typical characteristics mentioned before. It has a cut-on standing collar, the lapels are faced to be worn folded back. The waistcoat has two piped welt pockets and is closed with a single row of small fabric covered buttons.


A seam allowance of 5/8" (1,5cm) is included.

The instruction explains the historical sewing process as accuratly as possible, but the pattern is also suitable for historical cosplay or steampunk costumes.

Please scroll down for yardage and pattern information.

→→WHAT YOU RECEIVE←←
It is a multi-size pattern, you can choose between US 34-44 (EU 44-54) and US 46-56 (EU 56-66).
The pattern comes with detailed and illustrated sewing instructions in English and German.
This is a paper pattern, printed on solid, white paper (60-80g/m2).

→→PATTERN INFORMATION←←

Recommended fabric: (silk) sateen or taffeta
Lining: cotton twill
Interfacing: midweight linnen or cotton fabric

Fabric required:

US 34-44 (EU 44-54):
Fashion fabric: 0.9yds. (0.8m) with a width of 52“ (130cm)
Lining: 0.9yds. (0.9m) with a width of 55“ (140cm)
Wooden discs Ø 3/8“ to 5/8“ (10-15mm): 8-10 pcs.
Piping cord: 1-2mm: 1yd. (1m)

US 46-56 (EU 56-66):
Fashion fabric: 0.9yds. (0.8m) with a width of 52“ (130cm)
Lining: 1.1yds. (1m) with a width of 55“ (140cm)
Wooden discs Ø 3/8“ to 5/8“ (10-15mm): 8-10 pcs.
Piping cord: 1-2mm: 1yd. (1m)